IFS™ Integrated Furling Structure

The next generation of furling sails.

OneSails introduceert IFS™ (Intergrated Furling System) een nieuwe technologie voor het oprollen van gennakers en code 0's. Doormiddel van onze doorlopende garen technologie kunnen deze zeilen worden opgerold zonder de dure en zware anti-torsie kabel.

IFS™ zeilen worden ontwerpen en uitgerust met doorlopende garens in het voorlijk van het zeil wat de anti-torsie kabel vervangt. Er zijn vele voordelen van het weg laten van de kabel, zo zijn er meer ontwerp en zeilvorm mogelijkheden en is het zeil makkelijker in gebruik door een lager gewicht.

Thanks to the lower halyard tensions needed, 30% - 35% less than used with anti-torsion cable, it’s possible to avoid the need for a 2:1 halyard, reducing the sprit load and improving safety.

Hoofdfuncties

The IFS™ is a new sail concept with important advantages noticeable both when racing and cruising.

  1. Verbeterde aerodynamische perfromance.
  2. Geïntegreerde structuur in het zeil wat het rollen zonder kabel mogelijk maakt.
  3. 35% minder val spanning..
  4. Zonder kabel is er meer vrijheid in het ontwerp wat de performance in diverse windhoeken bevorderd.
  5. Het zeil is makkelijker in gebruik omdat het lichter is en makkelijker in de zak te stoppen is.
  6. Stabieler achterlijk in de ORC en IRC regel.
  7. Zonder kabel is het zeil lichter.
  8. Afwerking en accessoires op maat gemaakt.

IFS™ CODE 0
sails code

Definitions Code TWS (Knots) TWA (Degrees) Material
from naar from naar
C0 IFS 2 18 55 120 Membrane of Laminate
Code 0 Upwind C0 IFS Upwind 2 15 50 110 Membrane of Laminate
Code 0 ORC/IRC C0 IFS IRC 2 20 60 125 Membrane of Laminate

FLYING JIB

ORC WORLDS 2019: the One Sails’ "secret weapon”.

The convincing win of Italia Yachts' 11.98 at the recent ORC World Championship conceals a little secret called “flying jib”, unveiled today in the words of Sandro Montefusco, helmsman, sail designer, and winner of the World title on board “Sugar 3”.

“The idea we shared with Matteo Polli, designer of the Italia 11.98 - explains Sandro - was that of adding a multi-purpose headsail to the inventory, which could be used in the offshore races, since there were two such courses scheduled in the race program. We have therefore decided to sacrifice one of the five headsails allowed on board to build this flying jib: furling, with self-sustaining luff (cableless) thanks to OneSails’ IFS exclusive technology, attached to the bowsprit and hoisted with the masthead spinnaker halyard. We have increased the headsail area by 20m2 compared to the biggest jib, and thanks to the midgirth above 61% the rating penalty was quite moderate. The flying jib proved very efficient in light air and tight sailing angles, to the point where up to 5kts TWS our VMG was better with this sail than with the J1!. This was the sail which won us the offshore race. Built with OneSails’ proprietary Vektor2™ Carbon technology, the flying jib is a sail which gives medium to heavy displacement boats a definite performance advantage in light air, and can also be effectively used for reaching with more wind.”

“Our self-sustaining IFS headsails - adds Dede de Luca, OneSails’ CEO - are proving to be winning sails in many aspects, and are becoming more and more popular thanks to the combined performance and rating advantages they provide, plus the reduction of loads and simplicity of use when compared with more traditional furling headsails. OneSails has proven once more to be at the forefront of R&D, not only when it comes to new technologies, but also when innovation, design and teamwork are what matters.”

Photo courtesy: Italia Yachts

IFS™ Tips & Tricks

  1. The sail doesn’t need too much luff tension for proper effective furling, just tight enough to make it straight.
  2. The best furling is achieved when sailing dead downwind, reducing the apparent wind to a minimum.
  3. When furling, the sheet should not be completely eased, it is better to keep a slight tension on it, accompanying the furl.
  4. It is advisable to always furl the sail in the same direction, as the top will furl more smoothly and tightly.
  5. Before hoisting again, make sure the top hasn’t unfurled, which can happen during the dropping and stowage.
  6. Once the sail is unfurled, halyard tension can be adjusted according to the sailing angle (tighter for reaching, looser for wider angles).
  7. Although the integrated IFS structure can take significant tension, it isn't designed to withstand the heavy loads an antitorsion cable can carry. Care must be taken not to over tighten the halyard at any time, in order to prevent damage which could extend to the furler and other fittings.
  8. The sail should not be left hoisted when furled with the apparent wind exceeding around 12 knots, as it may unfurl.

Waarom voor Onesails kiezen

1. Exclusieve technologie.
Al meer dan 10 jaar werkt het OneSails ontwerp team aan exclusieve technologieën waar one-piece zeilen met doorlopende garen mee worden gemaakt. Voor Cruising en Wedstrijd boten.

2. Performance.
Laminate zonder delimantie, licht gewicht en vormvastheid presteren veel beter dan traditionele gesneden panel zeilen.

3. Kwailiteit.
M3™ en 4T FORTE™ membranen worden exclusief in Europa gemaakt. Door onze producten in de speciaal voor deze technologie ontworpen fabriek te produceren is de kwaliteit gewaarborgd.

4. Ontwerp.
De beste zeilvormen zijn een resultaat van de continue analyse en ervaring. Onesails is een van de leiders in de zeilindustrie. De continue investering in R&D zorgt er voor dat wij de beste zeilvormen hebben. Het succes van deze aanpak is te zien in de vele overwinning van Onesails klanten bij Nationale-, Europese- en Wereldkampioenschappen.

5. Service.
Een kern activiteit van elke OneSails loft is het aanbieden van service en ondersteuning. Onderdeel van onze toegewijde service is dat in elke loft experts aanwezig zijn die u kunnen helpen met het maken van de juiste keuzes en het leveren van de beste service. Het uitgebreide netwerk groeit snel met zeilmakers op alle centrale plekken langs de oceanen.

OneSails Sails Repair