Cruising symmetric and asymmetric spinnakers

The Downwind cruise sails by Onesails are designed for a safe and easy navigation even with a short handed crew. All the designs are developed with CFD simulation because the first aim of OneSails that is Quality and attention at all the details. The materials used are the best and selected to work properly under load, in a way to offer the best solutions to any customer. The Spinnaker and the Gennaker by OneSails can be provided with a special bag, the sock or a special furling system studied to simplify the dip.

SAIL VIEWER
CRUISING DOWNWIND SAILSALLROUND CRUISING SAILS
SPI
ASY
PFR
FFR
CC

Main features

The IFS™ is a new sail concept with important advantages noticeable both when racing and cruising.

  1. Improved aerodynamic performance.
  2. Structure integrated within the sail which allows furling without an anti-torsion cable.
  3. Lower halyard tension by 35% when compared to a traditional sail with cable.
  4. Without a cable the sail’s luff can be designed to project forward and to windward, improving performance at wider angles.
  5. Easy to handle because the furled sail is light and can easily be folded to fit in its bag.
  6. Stable leech profile even if measured as a gennaker according to ORC and IRC rules.
  7. Lighter sail (without anti-torsion cable).
  8. Bespoke finishing and accessories.

Spinnaker

The spinnaker is an important sail for cruising and OneSails provide the experience of designers and sailors, giving the perfect equilibrium between the surface and wind range angles. The spinnaker becomes, in this way, a real enjoyable moment for the whole crew and they can sail downwind without stress.

Gennaker

The gennakers by OneSails are designed for a wide range of apparent wind angle to avoid a continuous trimming during sailing. The Sails are controlled with fluid dynamic software simulations and optimized with the boat dimensions to get easy hoist and dip.

FFR - Flat Furling Reacher
EXCLUSIVE design from OneSails

FFR is an exclusive project by OneSails. It is an evolution of the code0 and is developed to maximize the yacht's potential in light air and have much more control downwind in stronger breezes.
The FFR is constructed from an advanced high quality nylon that is specially selected for this particular application. The luff of the FFR is fitted with an integral torsion luff rope to enable quick and easy furling. The FFR is a practical, medium weight, easy to handle sail that will not take up too much storage space and is designed for shorthanded sailing.
The FFR best wind angle and range is for light wind and let to sail closer than 50 degrees TWA. The FFR also makes heavy airs downwind sailing much more controllable and stable through the use of the furling mechanism and the integral tensioned luff stay. Sailing under autopilot with the FFR is stress free and trouble free. Variations in course due the wave action or slow autopilot reaction do not cause the FFR to collapse. The sail behaves much like a Genoa, backing gently at the luff until the boat bears away.

PFR - Power Furling Reacher
EXCLUSIVE design from OneSails

It's a variant of FFR from which it differs for a deeper shape and a full width at half that goes over 75% of the base. It can be measured as a gennaker. Can be used in deeper downwind routes than FFR.

CODE CRUISE
EXCLUSIVE design from OneSails

Code Cruise is a Code 0 with the cable and the UV band offering the following features:

  1. It is the right solution for customers that want to leave the sail hoisted all the time.
  2. Furling can be either bottom up or top down.
  3. This sail can be made in different materials (laminate, membrane or even nylon) to meet the customer's sailing needs.

In contrast to a conventional Spinnaker / Asymmetrics, the self-stabilizing WINGSPI™ is equipped with a lift creating wing in the upper part of the sail body.

The main advantages are:

  1. Autopilot friendly. The boat is more steady as the sail is automatically balanced by the lifting function of the wing. This leads to a reduction in rudder pressure and minimized corrections of the autopilot.
  2. 30-40% more wind range. Thanks to the gust dampening and lifting wing.
  3. 60°-180° wider TWA range. Due to a much flatter sail radius. The wing itself acts like a soft batten, stabilizing the leeches and keeps the sail open.

Why choose OneSails

1. Exclusive technology.
For over 10 years the OneSails design team have developed exclusive technologies to make one-piece continuous thread sails a reality for cruising and racing boats.

2. Performance.
Features like weight, shape control and deformation resistance means better performance compared to traditional panelled sails.

3. Quality.
Sails are designed and manufactured to the very highest standards from carefully selected components to ensure the very highest quality and durability. 4T FORTE™ and M3™ membranes are exclusively made in Italy. All the assembly process is completely made in a unique factory ensuring the meeting of all the required standards.

4. Design.
The best sail shapes are the result of continuous analysis and experience. OneSails is at the forefront of the sailmaking industry, continually investing in research and development to ensure that the very best sail shapes are available. The success of this approach is confirmed by the vast array of racing trophies OneSails clients have won, competing at National, International and World Championship level.

5. Service.
A core activity for every OneSails Loft is providing first class service, support and assistance. As part of our service commitment, each OneSails Loft has a team of experts on hand to ensure that we can deliver on our service pledge. In addition to a growing number of principle lofts, the OneSails Group has an extensive network of service centres strategically placed worldwide's coast line.

OneSails Sails Repair