IFS™ Integrated Furling System

OneSails IFS™ Integrated Furling System
The next generation of furling sails.

OneSails presents the IFS™ (Integrated Furling System), a new style of headsail and downwind sail construction which uses continuous fibre technology to create sails which can be furled without the use of a heavy and expensive anti-torsion cable.

IFS™ sails are designed to incorporate a net of continuous structural fibres, laid directly on to the sail’s luff, effectively replacing the cable. The advantages of this technology are considerable. A wider range of sail shapes can be set and furled with sail handling eased by the reduction in weight.

Thanks to the lower halyard tensions needed, 30% - 35% less than used with anti-torsion cable, it’s possible to avoid the need for a 2:1 halyard, reducing the sprit load and improving safety.

The IFS™ is a new sail concept with important advantages noticeable both when racing and cruising.

  1. Improved aerodynamic performance.
  2. Structure integrated within the sail which allows furling without an anti-torsion cable.
  3. Lower halyard tension by 35% when compared to a traditional sail with cable.
  4. Without a cable the sail’s luff can be designed to project forward and to windward, improving performance at wider angles.
  5. Easy to handle because the furled sail is light and can easily be folded to fit in its bag.
  6. Stable leech profile even if measured as a gennaker according to ORC and IRC rules.
  7. Lighter sail (without anti-torsion cable).
  8. Bespoke finishing and accessories.
Definitions Kode TWS (Knots) TWA (Knots) Material
from to from to
C0 IFS 2 18 55 120 Membrane or laminate
Code 0 Upwind C0 IFS Upwind 2 15 50 110 Membrane or laminate
Code 0 ORC/IRC C0 IFS IRC 2 20 60 125 Membrane or laminate
Definitions Kode TWS (Knots) TWA (Knots) Material
from to from to
AF0 3 18 65 130 Laminate or nylon
AF1 0 10 75 135 Nylon
AF3 10 25 95 140 Nylon
AF5 14 28 100 145 Nylon
Cruising asy IFS Cruising Asy 5 25 95 155 Nylon

IFS™ Tips & Tricks

  1. The sail doesn’t need too much luff tension for proper effective furling, just tight enough to make it straight.
  2. The best furling is achieved when sailing dead downwind, reducing the apparent wind to a minimum.
  3. When furling, the sheet should not be completely eased, it is better to keep a slight tension on it, accompanying the furl.
  4. It is advisable to always furl the sail in the same direction, as the top will furl more smoothly and tightly.
  5. Before hoisting again, make sure the top hasn’t unfurled, which can happen during the dropping and stowage.
  6. Once the sail is unfurled, halyard tension can be adjusted according to the sailing angle (tighter for reaching, looser for wider angles).
  7. Although the sail doesn’t require a lot of halyard tension, the integrated IFSTM structure can withstand heavy loads so care should be taken not to over tighten the halyard in order to prevent damage to the furler and other fittings.
  8. The sail should not be left hoisted when furled with the apparent wind exceeding around 12 knots.

Hvorfor vælge OneSails

1. Banebrydende teknologi.
Gennem mere end 10 år har OneSails arbejdet med udviklingen af teknikker, som nu gør det muligt at producere sejl med gennemgående, ubrudte tråde til både cruise og race.
2. Højtydende.
Egenskaber som lavere vægt, styr på facon og sejlkurver, og minimal deformation ved belastning, betyder højere ydelse end traditionelle panel-sejl.
3. Kvalitet.
M3™ og 4T FORTE™ membranerne fremstilles eksklusivt i Italien på OneSails’ specialkonstruerede produktions anlæg, med alle dele af den avancerede produktion underkastet løbende kvalitetskontrol.
4. Design.
Den optimale facon for et sejl bygger på timer på vandet, analyse og erfaring. OneSails hører til i førerfeltet i sejlindustrien, med løbende investeringer i research og udvikling. Netop dét sikrer, at et sejl fra OneSails repræsenterer det nyeste, mest effektive design. OneSails’ kunder kan bekræfte dette. De er blandt de bedst placerede ved verdensmesterskaber, nationale og internationale sejladser verden over.
5. Service.
t levere første klasses service, rådgivning og praktisk assistance har fuld fokus hos alle OneSails sejllofter. OneSails’ team af eksperter står til rådighed for sejllofterne for at de kan yde maksimal service og rådgivning. Udover et stadig stigende antal sejllofter rundt om i verden, har OneSails Group et omfattende net af service centre strategisk placeret rundt langs Europas kyster.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies.
x