Racing symmetric and asymmetric spinnakers

OneSails Racing Symmetrische Und Asymmetrische Spinnaker

Die Segel, die derzeit wohl die signifikantesten Entwicklungen durchlaufen sind Spinnaker. Ursprünglich ausschließlich für Vorwindkurse geeignet, sind sie heute durch den Einsatz von hervorragenden Materialien und computerunterstütztem Design nicht nur wesentlich effizienter vor dem Wind, sondern können durch die Vielzahl an verschiedenen Spinnaker- und Gennakerdesigns bis zu 45 Grad am Wind gefahren werden. Der 'flying shape' und die optimale Größe werden laufend optimiert und vor allem durch die Segelentwicklung in Einheitsklassen perfektioniert. OneSails fertigt eine breite Palette an High Performance Spinnakern für Racing Yachten. Das Design jedes Segels wird mit Hilfe von CFD-Simulationen entwickelt und präzise an das Boot und den hauptsächlichen Einsatzbereich angepasst um wirklich herausragende Segeleigenschaften zu erreichen.

Das für die Konstruktion verwendete Designprogramm berücksichtigt auch die Verdrängung der jeweiligen Yacht um sicherzustellen, dass die Form des Spinnakers auch perfekt harmoniert. Unsere Erfahrungen reichen von kleinen One Design Jollen bis hin zu Offshore Grand Prix Yachten. Wir helfen Ihnen gerne dabei das richtige Segel für Sie und Ihr Schiff zu finden und machen es Ihnen einfach das volle Potenzial Ihres neuen Segels ausnützen zu können. Der unten stehende Sail Selection Guide 'FASTER OFF THE WIND' bietet Ihnen eine Übersicht über den optimalen Einsatzbereich der verschiedenen Spinnaker.

SAIL VIEWER
RACING SYMMETRIC SPINNAKERSRACING ASYMMETRIC SPINNAKERS
RCR
VMG
RUN
AP
SPI/HVY
A0/AF0
A1/AF1
A2/AF2
A3/AF3
A4/AF4
A5/AF5

OneSails bietet mit dem IFS™ (Integriertes Furling System) eine revolutionäre neue Technologie für das sichere setzen und bergen von Gennakern und Code 0s.

Das OneSails IFS™ ermöglicht endlich ein zuverlässig sicheres Rollen von Gennakern und Code 0s. Für diese Segel wenden wir ab sofort unsere Membran-Technologien zur Verarbeitung von durchgehenden Fasern an und ersparen Ihnen so den Einsatz von schweren, starren und kostspieligen Anti-Torsionskabeln. In Segel mit IFS™ verlegen wir ein Netz von strukturellen Fasern in das Vorliek und ersetzen so das sonst übliche AT-Kabel. Die Vorteile dieser Technologie sind bemerkenswert, selbst Gennaker sind nun mit der zuverlässigen bottom-up Technology einsetzbar.

  1. Verbesserung der aerodynamischen Performance.
  2. Rollstruktur in des Segel eingearbeitet sie erlaubt das Rollen ohne AT-Kabel.
  3. Niedrigere Fallspannung um 35% im Vergleich zu Segeln mit AT-Kabel.
  4. Mehr Vorlieksrundung das Segel rotiert besser nach Luv und ermöglicht tiefere Kurse.
  5. Einfacheres Handling das Segel lässt sich einfacher in seine Tasche stauen.
  6. Stabiles Achterlieksprofil auch bei Segeln für ORC oder IRC Einsatz optimiert.
  7. Weniger Gewicht als mit AT Kabel.
  8. Bekannt hochwertiges Finish und Zubehör.

Power-reaching has always been a highlight of offshore racing but more sailors are now also looking beyond those up and down inshore courses

There is nothing more exhilarating in offshore sailing than power- reaching – the point of sail we dream about that makes the other legs of a tough race worth the pain... High speeds, spray and that visceral thrill we get knowing a boat is being pushed to its limits as the miles are speedily devoured. A drawback on this point of sail, however, is the heeling and imbalance that can happen when there’s either too much force on the sailplan from the masthead Code 0 (MH0) or even the fractional Code 0 (FR0), resulting in costly sometimes brutal course deviations to hold on to these sails. Yet the speed and power are hard to give up, even with the extra miles covered – while constantly recalculating the VMG trade-offs against a lower heading.

Often the only way to stay high enough to stay on course is to reduce the power and heeling moment by dousing the larger sails and shifting down to smaller headsails. But then there is a significant loss of power and speed, with more of the mainsail needed to maintain drive force. Using more main means shifting the load balance aft, which in turn results in more helm pressure to stay on track. The more main used, the more weather helm needed, and the greater the rudder angle which creates drag, inhibiting speed further.

The result is often a ‘void’ for the otherwise well-equipped offshore racer where the sail inventory is simply not optimised to get the best speed at the desired angle. The latest-generation ocean greyhounds chasing course records know this and have been designed with their masts well aft, creating enormous foretriangles in which to fly multiple combinations of headsails and staysails, often mounted on furlers for easy deployment.

Not all of us have the luxury of reconfiguring the entire boat – mast position, sailplan and appendages – just to accommodate a larger foretriangle and remain competitive in other sailing modes. But we can find speed in reducing heel while retaining power in the sailplan.

OneSails has been working hard on this problem. Paul Eldrid of OneSails in Perth is gearing up for the Austral summer season, and examining how to power up a variety of fast designs ranging from a Bakewell-White 36 to a HH42, DK 46, Carkeek 47 and several TP52s. All show benefits from new reaching headsail designs from OneSails. When given the space to operate efficiently, flying multiple headsails will not only provide more power to better balance out a fully trimmed mainsail, and reduce drag from the rudder, it will also stabilise the flow across the whole sailplan.

‘Fortunately there are no restrictions in IRC and very generous headsail allowances in ORCi that allow for development of these sails to fit an important niche for the passage racer,’ says Eldrid. ‘We have made several discoveries in this process that we think will really re-energise these boats in reaching conditions.’

Rather than the traditional arrangement of tacking a reaching headsail at the bow and then trying to fit in a genoa staysail somewhere on the foredeck, Eldrid has been experimenting with putting the larger headsail out on the end of the bowsprit (called the J0), giving plenty of room to fit another headsail aft of this, such as the new square-top jib staysail (the JS).

Many of us are used to course racing, where headsails all carry battens... this is not necessary with these reaching sails since the depth is further aft and leeches do not need to be straight, in fact they should twist for optimal flow. With no battens, furlers then become a strong option for more boats.

Optimal combinations of the headsails, reaching spinnakers and a reefed or full-hoist main are many and varied. Mindful of cost, OneSails is now developing ‘turbo-charged multiple headsail solutions’ that still use the niches of the MH0 and FR0 but now supplement them with new sails including the J0 and JS.

Up until now OneSails has been building these sails in panelled construction as they test mould shapes at full scale. However, the company’s design and R&D teams are also conducting a fuller Fluid Structure Interaction (FSI) study to provide the data to start using its continuous yarns one-piece 4T FORTE composite membranes to optimise for strength and weight.

‘Already we’re seeing a strong interest in bringing back the fun and thrill of more efficient reaching on all courses,’ says Eldrid. ‘This is an exciting new development path.’

Warum OneSails

1. Exclusive technology.
Seit über 10 Jahren entwickelt OneSails exklusive Technologien wodurch Segel aus durchgehend lastorientierten Fasern (in einem Stück) für Cruising- und Racing-Boote zur Realität wurden.

2. Leistung.
Eigenschaften wie geringes Gewicht, optimale Profilkontrolle  und Formstabilität bieten bessere Leistung im Vergleich zu herkömmlichen Segeln. Schwachstellen wie Nähte oder Klebestellen gibt es bei den modernen OneSails Technologien aus durchgehenden Fasern nicht.

3. Qualität.
Jedes Segel ist eine hochwertige Einzelanfertigung und wird unter Einhaltung höchster Qualitätsstandards in der OneSails Loft Ihrer Wahl gefertigt. OneSails verzichtet bewusst auf Massenproduktion und Produktionsauslagerung in Billiglohnländer.

4. Shape and Design.
Das beste Segeldesign ist immer das Ergebnis von viel Erfahrung, genauesten Analysen und moderner Designsoftware. OneSails steht an der Spitze der Segelmacher Industrie und investiert kontinuierlich in Forschung und Entwicklung, um die besten Designs sicherzustellen.

5. Service.
Nichts ist uns wichtiger als die Zufriedenheit unserer Kunden. Wer sich für OneSails entscheidet, entscheidet sich nicht nur für ein hochqualitatives Segel, sondern auch für sorgfältigen Service sowie erstklassige Beratung und Betreuung vor und auch nach dem Segelkauf. Das OneSails Service bietet mehr als nur Kundenservice im herkömmlichen Sinn – mit einer wachsenden Anzahl an Segelmachereien und einem dichten Netz an Service-Centern sind wir jedenfalls in Ihrer Nähe und immer gerne für Sie da!

OneSails Sails Repair